There is nothing more fulfilling than being able to catch a handful of fishes during your angling trip. But when it comes to fishing, two key features are crucial—having a sharp hook and a strong knot. If you neglect these two, you might end up losing a lot of fishing opportunities. The last thing you'll ever want to happen is to miss out on some of these marine creatures just because your knots aren't as strong as they should be.
Fret not, as we've prepared a fishing guide for you. In this article, we will share here's how a knot-tying tool can help:
How knots can fail
As mentioned, a knot failure can be the biggest culprit for losing a big catch when fishing. For this reason, it's crucial to understand how your knots can possibly fail, so take note of the following two reasons:
- Knot slippage: Typically, this can happen in two ways. First, the knot completely breaks, where the tail slides all the way back through the turns and twists under pressure. Second, the knot completely fails when turns of a knot slip create intense friction, melting the outer skin and causing the knot to loosen.
- Poorly constructed knots: If the knots aren't properly tied, then they won't be as strong as they should be. They will eventually slip and break, which won't serve their purpose during an angling trip. As a result, you won't be able to get a good catch.
What to consider as bad knots
It's important to know what types of knots are considered bad knots, so you know what to avoid. First off, understand that poor knots are essentially those that cut themselves under load.
Known as the "granny knot," the single overhand is a perfect example of a bad knot. For the uninitiated, this is simply a passable hitch for tying ribbon the way you'd normally do for a Christmas present. The problem with this is that it will easily and quickly break if it's subject to sudden, intense shock.
Because of this, be sure that one strand crosses over another single strand at right angles. If you aren’t yet an expert in knot-tying used for angling, keep in mind that the rule of thumb is to avoid a weak knot that depends on its internal structure.
How a knot-tying tool can help
Once you invest in a reliable and solid knot-tying tool, it will be able to assist you in tying knots when fishing. Of course, these tools vary from one supplier to another. Here at Hook-Eze Australia, our knot-tying tool is straightforward to use. All it takes is to cover the hook, cover a variety of tackle, and clip and go – it's that simple and easy!
As we aim to provide you with a fisherman's knot guide, our goal is to make tying knots much easier, safer, and not to mention fun. If you're looking for the best fish knot-tying tool in Australia, we've got you covered!
Conclusion
At this point, you now know how a knot-tying tool can help. Along with this is to absorb the valuable information discussed above, particularly how knots can fail and what to consider as bad knots. Most importantly, be sure to obtain the best knot-tying tool for fishing from a highly reliable supplier. By doing so, you'll end up having a successful fishing endeavour!
Are you having some problems with tying the knots for fishing? You've come to the right place! We specifically provide multi-functional fishing knot tying tools in Australia, along with other fishing tools, supplies, and accessories. Check out our fishing tools and place your order now!