Instructions for Tying a Snell Knot

1. Thread the Line Through the Hook Eye:

   • Pass the end of the leader or fishing line through the eye of the hook from the point side. Leave enough tag end to make multiple wraps around the shank of the hook.

2. Create a Loop Along the Shank:

   • Lay the tag end along the shank of the hook, parallel to the main line. Form a loop by bringing the tag end back toward the hook eye.

3. Wrap the Tag End Around the Shank:

   • Hold the loop in place with your thumb and forefinger. Begin wrapping the tag end around the shank of the hook and the main line, working your way from the eye toward the bend of the hook. Make 5-7 tight, even wraps.

4. Pass the Tag End Through the Loop:

   • After making the wraps, pass the tag end through the loop created near the hook eye. Ensure the tag end goes in the same direction it came out.

5. Tighten the Knot:

   • Moisten the knot with water or saliva to reduce friction and ensure a smooth tightening process.
   • Pull on the main line while holding the wraps in place to tighten the knot. Make sure the wraps snugly bind around the shank of the hook and the main line.

6. Secure the Knot:

   • Once the knot is tight and secure, trim the tag end close to the wraps, leaving a small amount to prevent slippage.

Your Snell knot is now tied and ready for use. This knot provides a strong, straight-line connection between the hook and the leader, making it ideal for various fishing applications, especially those requiring a direct pull. Its strength and reliability make it a preferred choice among many anglers.